logo

λεπτομέρειες για τα προϊόντα

Created with Pixso. Σπίτι Created with Pixso. προϊόντα Created with Pixso.
Εξοπλισμός δοκιμής εισόδου νερού
Created with Pixso.

IEC60529 IPX7 Waterproof Immersion Test Equipment Soaking Immersion Test System

IEC60529 IPX7 Waterproof Immersion Test Equipment Soaking Immersion Test System

Ονομασία μάρκας: Sinuo
Αριθμός μοντέλου: SN4410
Τροποποιημένο: 1
τιμή: Customized
Όροι πληρωμής: T/t
Ικανότητα εφοδιασμού: 30 σετ/μήνα
Λεπτομέρειες
Τόπος καταγωγής:
ΚΙΝΑ
Πιστοποίηση:
Calibration Certificate (Cost Additional)
Εξωτερικό μέγεθος αιθουσών:
W 1080* D 1080* H 2300mm
Εσωτερικό μέγεθος αιθουσών:
L 1000* W 1000* H1800mm
Πλάτος παραθύρων παρατήρησης:
200 χιλιοστά
Μέγιστο βάθος νερού δοκιμής:
1,8 εκατομμύρια
Περιεχόμενο δοκιμής:
IPX7
Υλικό εσωτερικού θαλάμου:
ανοξείδωτο πάχους 2.0mm
Εξωτερικό υλικό αιθουσών:
Το ανοξείδωτο καλύπτει + πλαίσιο σχεδιαγράμματος αργιλίου
Παρατηρητικό παράθυρο:
Μετριασμένο γυαλί (πάχος: 12mm)
Συσκευασία λεπτομέρειες:
θήκη από κόντρα πλακέ
Δυνατότητα προσφοράς:
30 σετ/μήνα
Περιγραφή του προϊόντος

 

 

IEC60529 IPX7 Waterproof Immersion Test Equipment Soaking Immersion Test System

 

Complied Standards & Clauses


 

IEC 60529 degree of protection provided by enclosures (IP Code) of the IPX7, IEC60884-1,  IEC60598-1.

 

Equipment Overview


 

This equipment is designed for IPX7 waterproof testing, specifically simulating immersion conditions to evaluate the water resistance of products. By performing the test, it verifies whether the waterproof level of the product meets the required standards. It is widely applied in product development, design validation, quality assurance, and factory inspection, ensuring reliable performance and compliance with international safety regulations.

 

Technical Parameters


 

Test content IPX7
Power supply AC 220V,50Hz, 1KW
Max. test water depth 1.8m
External chamber material Stainless steel plates + Aluminum profile frame
Observation window width 200mm
Chamber external size Approximately W 1080* D 1080*H 2300mm (including casters)
Chamber inner size Length 1000* W 1000* H1800mm
Water level adjustment method Water inlet / drain valve, manual adjustment
Water level display Scale (accuracy 1mm)
Test time 0.01 second-99.99hours can be preset
Inner chamber material 2.0mm thickness stainless steel
Electric lifting basket Made of stainless steel, controlled by electric hoist
Control method Buttons (non-PLC)
Immersion depth requirements

The lowest point of enclosure with a height less than 850 mm is located 1000mm below the surface of the water

The highest point of enclosure with a height equal to or greater than 850mm is located 150mm below the surface of the water

Observation window Tempered glass (thickness: 12mm)
 
 

Details


 
IEC60529 IPX7 Waterproof Immersion Test Equipment Soaking Immersion Test System 0IEC60529 IPX7 Waterproof Immersion Test Equipment Soaking Immersion Test System 1